Vesper Sp160 Ais-vhf-fm Antenna Splitter

Vesper Sp160 Ais-vhf-fm Antenna Splitter

Regular price
Sale price
Regular price
Sold out
Unit price
Shipping calculated at checkout.

Vesper SP160 AIS / VHF / FM Antenna Splitter

Model: 010-02820-00
  • AIS Sensitivity Gain
  • Low power consumption
  • Simple connections
  • Easy installation
  • LED status indicators
  • AM and FM radio connection
  • VHF-in-use indicator
  • Fail-safe VHF priority
  • Antenna quality monitor indicates if there is a problem
  • 12 or 24 Volt supply
  • Waterproof

Many AIS splitters introduce significant signal loss, some say no loss but this unique Vesper Marine splitter is the only one that provides signal gain - improving AIS reception and increasing range. This is because the Vesper Marine splitter has a built-in low noise amplifier. This is especially important to increase the receive range from the increasing number of low power AIS SART and MOB devices.

In addition to the amplification provided by this splitter, when used with your existing antenna you can optimize the range of your AIS transponder because the antenna is also mounted as high as possible.

Designed to work with all Vesper Marine AIS transponders including the popular WatchMate XB-6000 and WatchMate XB-8000. In addition it has a unique on-screen VHF-in-use indicator when used with the WatchMate 850 and WatchMate Vision AIS transponders.

Increases the performance of other manufacturer's AIS receivers and transponders too!

To simplify installation you can share an existing VHF antenna by using this splitter. The unit removes the need for a separate VHF antenna for an AIS receiver or transponder and allows a single antenna to be shared with a VHF radio.

This is an excellent solution when it is difficult to install an additional antenna or you wish to share an existing VHF antenna and maximize your AIS range.

This Vesper Marine splitter is specifically designed for use with both AIS receivers and transponders.

You can use this splitter with an existing antenna installation that is in good operating condition. However, for an optimized AIS and VHF antenna system, choose our AIS antenna designed to be shared with VHF radios.

Our splitter includes two 2m (6.5ft) long patch cables to go between the splitter, AIS and your VHF radio. This provides everything needed for most installations. However, if you require a longer cable be sure to choose high quality marine grade 50 ohm cable with standard PL259 plugs to go between the splitter and your AIS transponder or VHF.

Frequency Range 156MHz to 163MHz
Operating temperature -25°C to +55°C (-13°F to 131°F)
Environmental Watertight (USCG CFR-46, IPx7)
Power Supply 10-32 VDC, <0.8W nominal
Maximum Current 270 mA
Overall Size 135mm Long x 107 Wide x 56 Deep (5 5/16in x 4 1/4in x 2 1/4in)
Maximum VHF power 25w
Maximum AIS power 12.5w
Compatibility Fully compatible with all Vesper Marine AIS transponders and receivers. Also compatible with other manufacturer's AIS receivers and transponders and will typically increase their performance.
Antenna Connector 50 ohm, SO-239 (UHF)
VHF & AIS Connectors SO-239 (UHF). Requires two appropriate length standard 50 ohm patch cables with PL-259 plugs (two 2m (6.5ft) cables included).
AM / FM Connector 75 ohm, BNC, optional 2m (6') cable available BNC to Motorola plug
Patch Cable Two provided as standard. 2m (6.5ft) long 50 ? cable with PL259 connectors.
Insertion Loss VHF RX <1.5dB / VHF TX <1dB / AIS TX <1dB
AM/FM Insertion Loss AM [500kHz - 26 MHz] 3dB Max, FM [87 - 108 MHz] 8 dB Max
AIS Receive Gain 12dB
Noise Figure <1.5dB

What's in the Box:
  • AIS VHF antenna splitter
  • Installation guide
  • 2m (6.5') Power cable
  • 2m (6.5') Power cable